Changes v1.0.12 v1.0.13: Difference between revisions
Jump to navigation
Jump to search
(New page: ==Changelog between 1.0.12 and 1.0.13 releases== * alsa-driver + Sound Core - Fix detection of CONFIG_I2C_POWERMAC - release 1.0.13 - release 1.0.13rc3 - release 1.0.13r...) |
m (Protected "Changes v1.0.12 v1.0.13" [edit=sysop:move=sysop]) |
(No difference)
| |
Latest revision as of 07:53, 1 September 2007
Changelog between 1.0.12 and 1.0.13 releases
- alsa-driver
+ Sound Core
- Fix detection of CONFIG_I2C_POWERMAC
- release 1.0.13
- release 1.0.13rc3
- release 1.0.13rc1
- Fix check of CONFIG_VIDEO_V4L1 on 2.6.18 kernel
- Fix hacked linux/autoconf.h generation in configure
- Fix build of snd-aoa drivers
- release 1.0.13rc2
+ ALSA Core
- fix compatibility code
- add Dell PCI ID
- fix struct device incompatibility with 2.2.x kernels
- Add wrappers for early 2.6 kernels
- sound core: Use SEEK_{SET,CUR,END} instead of hardcoded values
- Add definitions of SEEK_SET & co for old kernels
- Add dummy wrapper of pci_{enable,disable}_msi()
- Add pcm_class attribute to PCM sysfs entry
- Add workaround for sysfs stuff for older kernels
+ Control Midlevel
- Return error if no user TLV is defined
- Add the definition of linear volume TLV
- Add missing compat ioctls for ALSA control API
- Fix errors with user TLV_WRITE
- Add definition of TLV dB range compound
+ HWDEP Midlevel
- Dereference after free in snd_hwdep_release()
+ PCM Midlevel
- Add pcm_class attribute to PCM sysfs entry
+ AC97 Codec
- Add TLV support to AC97 codec driver
- ac97 - Fix VIA EPIA sound problem
- ac97: Fix AD1819 volume range
- ac97: correct some Mic mixer elements
- Fix WM9705 AC97 patch build error
- ac97 - Enable S/PDIF on ASUS P5P800-VM mobo
- WM9712 fixes for ac97_patch.c
+ AD1816A driver
- Add dB scale information to ad1816a driver
+ AD1848 driver
- Add dB scale information to ad1848 driver
+ AK4531 codec
- Add dB scale information to ak4531 codec
+ AK4XXX AD/DA converters
- ak4xxx - Remove bogus IPGA controls
- Fix volume control for the AK4358 DAC
- Clean up and add TLV support to AK4xxx i2c driver
+ ALSA Version
- global: remove include/version.h
+ Apple Onboard Audio driver
- aoa: add locking to tas codec
- Fix build of snd-aoa drivers
+ CS4281 driver
- Add dB scale information to cs4281 driver
+ Digigram PCXHR driver
- Add dB scale information to pcxhr driver
+ Digigram VX Pocket driver
- Add missing dB scale information to vxpocket driver
- Add missing dB scale information to vxpocket driver
- Add dB scale information to vxpocket and vx222 drivers
- Add dB scale information to vxpocket driver
+ Digigram VX core
- Add dB scale information to vxpocket and vx222 drivers
+ Digigram VX222 driver
- Add dB scale information to vxpocket and vx222 drivers
+ Documentation
- hda-codec - Add 5 stack audio support for Intel 965 systems
- hda-intel - Fix pci_disable_msi() call
- hda-codec - Fix for Acer laptops with ALC883 codec
- hda-codec - Support for SigmaTel 9872
- hda-codec - Add support for LG LW25 laptop
+ EMU10K1/EMU10K2 driver
- make sound/pci/emu10k1/emu10k1.c:snd_emu10k1_resume() static
+ ES18xx driver
- Fix memory leak in sound/isa/es18xx.c
+ ES1938 driver
- ES1938: remove duplicate field initialization
- Add dB information to es1938 driver
+ ES1968 driver
- es1968: Fix hw volume
+ FM801 driver
- Add dB scale information to fm801 driver
+ GUS Library
- gus: Use SEEK_{SET,CUR,END} instead of hardcoded values
+ Generic drivers
- Move CONFIG_SND_AC97_POWER_SAVE to pci/Kconfig
- Add dB scale information to dummy driver
+ HDA Codec driver
- hda-codec - Use model=ref for some Dell laptops
- hda-codec - Add 5 stack audio support for Intel 965 systems
- hda-codec - Add device id for Motorola si3054-compatible codec
- hda-codec - Add vendor ids for Motorola and Conexant
- hda-codec - Fix SPDIF device number of ALC codecs
- hda-codec - Fix mic input with STAC92xx codecs
- hda-codec - Fix headphone auto-toggle on sigmatel codec
- hda-codec - Fix for Acer laptops with ALC883 codec
- hda-codec - Support for SigmaTel 9872
- hda-codec - Add support for new Intel boards with Stac9227 codec
- hda_intel prefer 24bit instead of 20bit
- hda/patch_si3054: new codec vendor IDs
- Add new subdevice ids for hda-intel
- hda-codec - restore HDA sigmatel pin configs on resume
- [snd-intel-hda] enable center/LFE speaker on some laptops
- hda-codec - Add support for LG LW25 laptop
- hda-codec - Support multiple headphone pins
+ HDA Intel driver
- hda-intel - Fix suspend/resume with MSI
- hda-intel - Switch to polling mode for CORB/RIRB communication
- intel_hda: MSI support
- hda-intel - Remove volatile
- sound/pci/hda/intel_hda: small cleanups
- hda-intel - Fix pci_disable_msi() call
- hda-codec - Fix SPDIF device number of ALC codecs
- hda-intel - A slight cleanup of timeout check in azx_get_response()
- hda-intel - New pci id for Nvidia MCP61
+ HDA generic driver
- hda-codec - Fix mic capture with generic parser
- hda-codec - Add independent headphone volume control
- hda-codec - Support multiple headphone pins
+ ICE1712 driver
- Add dB scale information to ice1712 driver
- Add dB scale information to ice1724 driver
+ ICE1724 driver
- ak4xxx - Remove bogus IPGA controls
- Clean up and add TLV support to AK4xxx i2c driver
+ Intel8x0-modem driver
- intel8x0m - Free irq in suspend
+ MIXART driver
- Add dB scale information to mixart driver
- mixart: Use SEEK_{SET,CUR,END} instead of hardcoded values
+ OPL3SA2 driver
- Add dB scale information to opl3sa2 driver
+ OPL4
- opl4: Use SEEK_{SET,CUR,END} instead of hardcoded values
+ PCI drivers
- Move CONFIG_SND_AC97_POWER_SAVE to pci/Kconfig
+ PPC Keywest driver
- powermac - Fix Oops when conflicting with aoa driver
+ PPC Tumbler driver
- [PPC,SOUND] Fix audio gpio state detection
+ RME HDSP driver
- hdsp - Fix auto-updating of firmware
+ SPARC DBRI driver
- sparc dbri: removal of dri_desc struct
- sparc dbri: more driver cleanup
- sparc dbri: fixed setting of burst size after reset
- sparc dbri: simplifed linking time slot function
- sparc dbri: ring buffered version
- sparc dbri: recording is back
- dbri sparc: fixes TS leak
- sparc dbri: OSS layer fix
- sparc dbri: SMP fixes
- sparc dbri: hardware constrains added
+ Trident driver
- Add dB scale information to trident driver
+ USB generic driver
- usb-audio: increase number of packets per URB
- usb-audio: add mixer control names for the Aureon 5.1 MkII
- Support for non-standard rates in USB audio driver
+ Utils
- Fix check of CONFIG_VIDEO_V4L1 on 2.6.18 kernel
+ VIA82xx driver
- Added TLV support to VIA82xx driver
+ YMFPCI driver
- ymfpci - Add TLV entries for native volume controls
- alsa-lib
+ Core - configure.in - fix "checking for versioned symbols" error in ./configure - add support for hosts that have custom symbol prefixes - make sure commands in cvs/hg compile scripts worked - Add --disable-alisp configure option + Control API - Fix bogus value when no user TLV is defined - Add dB range information to PCM softvol plugin - Add handling of linear volume in simple mixer - Check control API protocol version for TLV control - configuration: avoid endless loop when a key refers to itself - Add support of dB range compound TLV + Device Name API - remove unneeded headers from src/names.c + Mixer API - Add dB_range ops for simple mixer - Add set_dB ops to simple mixer - Add handling of linear volume in simple mixer - Fix wrong scales in linear volume calculation - Fix segfault when invalid TLV is passed - Add support of dB range compound TLV + PCM API - Add dB range information to PCM softvol plugin - fix parsing of non-decimal integers in configuration files - rate plugin: fix boundary calculations + Timer API - timer_hw: fix file descriptor leak + /Makefile.am - Add --disable-alisp configure option + /src/Makefile.am - Fix a typo - Add --disable-alisp configure option + ALSA Lisp - remove unneeded headers from alsa-lib/src/alisp/alisp.c + Configuration - fix parsing of non-decimal integers in configuration files - configuration: avoid endless loop when a key refers to itself - configuration: added one more alias check to detect a circular configuration - Add --disable-alisp configure option
- alsa-plugins
+ Core - release 1.0.12 + PulseAudio -> ALSA plugin - Remove stray Polypaudio strings
- alsa-utils
+ ALSA Control (alsactl) - Restore user-defined TLV + alsaconf - Fix setup for SLES10/SLED10 - Initialize volumes using dB in alsaconf + alsamixer - Show the mute dB state correctly + amixer - Add handling of dB to amixer - Add linear-volume handling in amixer
- alsa-tools
+ Envy24 Control - Fix ADC controls with higher resolution in envy24control
- alsa-firmware
+ Digigram Echo Audio Firmware - Remove non-existing loader_dsp.fw - echoaudio, fix typo + EMU Firmware - Added missing audio_dock.fw
Detailed changelog between 1.0.12 and 1.0.13 releases
- alsa-driver
+ Sound Core
- Fix detection of CONFIG_I2C_POWERMAC
Fix detection of CONFIG_I2C_POWERMAC in configure script.
- release 1.0.13
- release 1.0.13rc3
- release 1.0.13rc1
- Fix check of CONFIG_VIDEO_V4L1 on 2.6.18 kernel
Fix the configure check of CONFIG_VIDEO_V4L1 introduced since 2.6.18 kernel.
- Fix hacked linux/autoconf.h generation in configure
Fixed the generation of linux/autoconf.h hack, not to modify
non-CONFIG_SND_* entries. This broke the firmware loading and
possibly lead to other nasty bugs.
- Fix build of snd-aoa drivers
Added/fixed files to build snd-aoa drivers on alsa-driver tree.
- release 1.0.13rc2
+ ALSA Core
- fix compatibility code
fix some typos in the class_device and MSI compatibility code
- add Dell PCI ID
add the PCI vendor ID for Dell for 2.2.x kernels
- fix struct device incompatibility with 2.2.x kernels
In 2.2.x kernels, <linux/netdevice.h> (used by the USB compatibility
header <linux/kcomp.h>) defines its own struct device which conflicts
with our 2.6 wrapper.
- Add wrappers for early 2.6 kernels
Fixed compilation with early 2.6 kernels.
- ifdef check around in_atomic() wrapper
- missing __ATTR() definition
- use macros for pci_enable_msi() to overcome distro-specific additions
- sound core: Use SEEK_{SET,CUR,END} instead of hardcoded values
sound core: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
- Add definitions of SEEK_SET & co for old kernels
Added the definitions of SEEK_SET & co for older kernels than 2.6.18.
- Add dummy wrapper of pci_{enable,disable}_msi()
Added the dummy wrapper of pci_{enable,disable}_msi() functions
for older kernels.
- Add pcm_class attribute to PCM sysfs entry
This patch adds a new attribute, pcm_class, to each PCM sysfs entry.
It's useful to detect what kind of PCM stream is, for example, HAL
can check whether it's a modem or not.
- Add workaround for sysfs stuff for older kernels
Added dummy wrappers as workaround for the sysfs stuff for older kernels.
+ Control Midlevel
- Return error if no user TLV is defined
Retrun error to user TLV_READ ioctl if no TLV is defined.
(Until now, nothing was written and rerunred successfully.)
- Add the definition of linear volume TLV
Added the definition of linear volume TLV type.
Some DSP chips and codecs (e.g. AK codec) use linear volume control.
- Add missing compat ioctls for ALSA control API
Added the missing 32bit-compat ioctl entries for ALSA control API
(espcially for recent additions of TLV stuff).
- Fix errors with user TLV_WRITE
Fixed the errors at checking info.access field during user TLV_WRITE
call. It should have been zero-initialized.
- Add definition of TLV dB range compound
Added the definition of TLV dB range compound. It contains one or
more dB-range or linear-volume TLV entries with min/max ranges.
Used for volume controls with non-linear curves.
+ HWDEP Midlevel
- Dereference after free in snd_hwdep_release()
snd_card_file_remove() may free hw->card so we can't dereference
hw->card->module after that.
Coverity ID 1420.
Signed-off-by: Florin Malita <fmalita@gmail.com>
+ PCM Midlevel
- Add pcm_class attribute to PCM sysfs entry
This patch adds a new attribute, pcm_class, to each PCM sysfs entry.
It's useful to detect what kind of PCM stream is, for example, HAL
can check whether it's a modem or not.
+ AC97 Codec
- Add TLV support to AC97 codec driver
Added the TLV support to AC97 codec driver for addition of
dB range information.
- ac97 - Fix VIA EPIA sound problem
Fix the bad sound quality on VIA EPIA system using VIA VT1617A
(ALSA bug#2381).
Signed-off-by: Andrey Liakhovets <liakh@dol.ru>
- ac97: Fix AD1819 volume range
AD1819 volume registers can hold extra bits which do not affect the
actual volume. Add a res_table to the codec patch to fix the problem.
PCM, line and mic volume were tested.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
- ac97: correct some Mic mixer elements
Revert the mixer element names of some Mic controls to the state of
2.6.17. This should fix the name mismatch in alsactl.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Fix WM9705 AC97 patch build error
This patch fixes a build error (introduced by me) in ac97_patch.c wrt
WM9705 touchscreen.
o Removed spurious '3D' from character after |= operation (0x3D is
ASCII for '=')
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- ac97 - Enable S/PDIF on ASUS P5P800-VM mobo
The attached patch will force building the S/PDIF controls on the PCU
SSID for Asus P5P800-VM motherboard, even if the AC97_EI_SPDIF bit is
not set.
Signed-off-by: Magnus Sandin <magnus@sandin.cx>
- WM9712 fixes for ac97_patch.c
This patch by Luke Zhang fixes a couple of issues with the WM9712
support in ac97_patch.c
Changes:-
o Fix Out3 ZC switch invert.
o Extend capture volume control to 6 bits.
o Change Mic 1 volume mask to 5 bits (31).
o Add Mic 2 volume.
Signed-off-by: Luke Zhang <lzhang@intrinsyc.com>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ AD1816A driver
- Add dB scale information to ad1816a driver
Added the dB scale information to ad1816a driver.
+ AD1848 driver
- Add dB scale information to ad1848 driver
Added the dB scale information to ad1848 driver.
+ AK4531 codec
- Add dB scale information to ak4531 codec
Added the dB scale information to ak4531 codec driver.
+ AK4XXX AD/DA converters
- ak4xxx - Remove bogus IPGA controls
Remove IPGA volume controls and merge the IPGA range to ADC volume
controls. These two volumes are not really independent but connected
simply in different ranges 0-0x7f and 0x80-max. It doesn't make sense
to provide two controls.
Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range
to skip 0x80 (increment one) for such controls.
- Fix volume control for the AK4358 DAC
Fix volume control for the AK4358 DAC.
The attenuation control registers of the AK4358 use only 7bit for the
volume, the msb is used to enable attenuation output. Without this
patch there are 256 volume levels the lower 128 of which are mute.
Signed-off-by: Jochen Voss <voss@seehuhn.de>
- Clean up and add TLV support to AK4xxx i2c driver
- Clean up the code in AK4xxx-ADDA i2c code.
- Fix capture gain controls for AK5365
- Changed the static table for DAC/ADC mixer labels to use
structs
- Implemented TLV entries for each AK codec
The volumes in AK4524, AK4528 and AK5365 are corrected with
a table to be suitable for dB conversion.
+ ALSA Version
- global: remove include/version.h
+ Apple Onboard Audio driver
- aoa: add locking to tas codec
Looks like I completely forgot to do this. This patch adds locking to
the tas codec so two userspace programs can't hit the controls at the
same time. Tested on my powerbook, but I obviously can't find any
problems even without it since it doesn't do SMP.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
- Fix build of snd-aoa drivers
Added/fixed files to build snd-aoa drivers on alsa-driver tree.
+ CS4281 driver
- Add dB scale information to cs4281 driver
Added the dB scale information to cs4281 driver.
+ Digigram PCXHR driver
- Add dB scale information to pcxhr driver
Added the dB scale information to pcxhr driver.
+ Digigram VX Pocket driver
- Add missing dB scale information to vxpocket driver
Added the missing dB scale information for Mic volume
to vxpocket driver.
- Add missing dB scale information to vxpocket driver
Added the missing dB scale information to vxpocket driver
for 2.6.16 kernel.
- Add dB scale information to vxpocket and vx222 drivers
Added the dB scale information to vxpocket and vx222 drivers.
- Add dB scale information to vxpocket driver
Added the dB scale information to vxpocket driver.
+ Digigram VX core
- Add dB scale information to vxpocket and vx222 drivers
Added the dB scale information to vxpocket and vx222 drivers.
+ Digigram VX222 driver
- Add dB scale information to vxpocket and vx222 drivers
Added the dB scale information to vxpocket and vx222 drivers.
+ Documentation
- hda-codec - Add 5 stack audio support for Intel 965 systems
This patch renames the 965_2112 function ids to 965_3ST, and
adds functional support for 965_5ST (5 stack 7.1 surround).
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
- hda-intel - Fix pci_disable_msi() call
Fix the order to call pci_disable_msi() to be after free_irq().
(Otherwise pci_disable_msi() bugs you.)
Also, added a description of disable_msi option to documentation.
- hda-codec - Fix for Acer laptops with ALC883 codec
Patch enables the internal speaker on acer laptops with ALC883.
Signed-off-by: Vladimir Avdonin <vldmrrr@yahoo.com>
- hda-codec - Support for SigmaTel 9872
- AR11M and AR11S uses the same chip hence we claim to support the AR Series.
- Added commentary about STAC9225s which shares the same id as CXD9872RD.
- Added entry for 7662 but won't work automatically until pci_subdevice
is known.
- "vaio" model now corresponds to CXD9872RD_VAIO for backward compat.
- Replaced STAC766x_VAIO with CXD9872RD_VAIO, STAC9872AK_VAIO, STAC9872K_VAIO
and CXD9872AKD_VAIO
- Added "vaio-ar" model for potential future modifications.
Signed-off-by: Guillaume Munch <diabo@free.fr>
- hda-codec - Add support for LG LW25 laptop
Added the support for LG LW25 laptop with ALC880 codec.
It's the same codec model as LG LW20 (model=lg-lw).
+ EMU10K1/EMU10K2 driver
- make sound/pci/emu10k1/emu10k1.c:snd_emu10k1_resume() static
This patch makes the needlessly global snd_emu10k1_resume() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
+ ES18xx driver
- Fix memory leak in sound/isa/es18xx.c
Fixed a memory leak in the error patch.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
+ ES1938 driver
- ES1938: remove duplicate field initialization
Remove the duplicate and inconsistent initialization of the kcontrol
access field.
- Add dB information to es1938 driver
Added the dB information to ESS Solo (es1938) driver.
The new compound dB range TLVs are used for non-linear native
volume controls.
+ ES1968 driver
- es1968: Fix hw volume
Fix maestro2 hardware volume control. Tested on a Dell Inspiron 7000.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
+ FM801 driver
- Add dB scale information to fm801 driver
Added the dB scale information to fm801 driver.
+ GUS Library
- gus: Use SEEK_{SET,CUR,END} instead of hardcoded values
gus: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
+ Generic drivers
- Move CONFIG_SND_AC97_POWER_SAVE to pci/Kconfig
Moved the entry of CONFIG_SND_AC97_POWER_SAVE from drivers/Kconfig to
more appropriate place, pci/Kconfig.
- Add dB scale information to dummy driver
Added the dB scale information to dummy driver.
+ HDA Codec driver
- hda-codec - Use model=ref for some Dell laptops
Force to choose model=ref for some Dell laptops with STAC9200 codec
chip for fixing the silent mic recording problem (possibly due to
a BIOS bug). Reference: ALSA bug#2038
So far, applied to Inspiron 630m, Latitude D620 and 120L.
- hda-codec - Add 5 stack audio support for Intel 965 systems
This patch renames the 965_2112 function ids to 965_3ST, and
adds functional support for 965_5ST (5 stack 7.1 surround).
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
- hda-codec - Add device id for Motorola si3054-compatible codec
Added the device id for Motorola si3054-compatible modem codec
on a Gateway laptop.
- hda-codec - Add vendor ids for Motorola and Conexant
Added string entries for Motorola and Conexant vendor ids.
- hda-codec - Fix SPDIF device number of ALC codecs
Assign the SPDIF always to the secondary device (dev#1) to keep
the same configuration. Move the optional capture device to the
third device (dev#2).
hda_intel now just ignores the NULL entries in the pcm arrays
from codecs.
- hda-codec - Fix mic input with STAC92xx codecs
Fixed mic input with STAC92xx codecs. The mic pin was sometimes set to
OUTPUT by the headphone jack detection.
Also, try to assign a secondary mic as front-mic (or vice versa)
in the auto-detection if possible.
- hda-codec - Fix headphone auto-toggle on sigmatel codec
Fix/optimize the headphone auto-toggle function on sigmatel codecs.
The headphone pins are kept as output. When headhpones are unplugged,
you cannot hear anyway ;)
- hda-codec - Fix for Acer laptops with ALC883 codec
Patch enables the internal speaker on acer laptops with ALC883.
Signed-off-by: Vladimir Avdonin <vldmrrr@yahoo.com>
- hda-codec - Support for SigmaTel 9872
- AR11M and AR11S uses the same chip hence we claim to support the AR Series.
- Added commentary about STAC9225s which shares the same id as CXD9872RD.
- Added entry for 7662 but won't work automatically until pci_subdevice
is known.
- "vaio" model now corresponds to CXD9872RD_VAIO for backward compat.
- Replaced STAC766x_VAIO with CXD9872RD_VAIO, STAC9872AK_VAIO, STAC9872K_VAIO
and CXD9872AKD_VAIO
- Added "vaio-ar" model for potential future modifications.
Signed-off-by: Guillaume Munch <diabo@free.fr>
- hda-codec - Add support for new Intel boards with Stac9227 codec
This patch adds full 5.1 audio support for Intel boards
with the SigmaTel 9227 codec chip (946, 963, 965 series).
Signed-off-by: Tobin Davis <tobinx.b.davis@intel.com>
- hda_intel prefer 24bit instead of 20bit
If I understand the hda_intel code, for format > 20bit it only advertise
the SNDRV_PCM_FMTBIT_S32_LE format and play it at 32 bit, 20 bit or 24 bit.
But if the 20bit and 24bit are available, actually it prefer the 20bit
format. This path is to prefer the 24bit format instead of 20bit.
Signed-off-by: Nicolas Graziano <nicolas.graziano@wanadoo.fr>
- hda/patch_si3054: new codec vendor IDs
There are additional IDs for Si3054 codec based HDA modems. Most of
them were discovered on discuss@linmodems.org list - Thanks to MarvS
and all linmodems.org folks.
Signed-off-by: Sasha Khapyorsky <sashak@alsa-project.org>
- Add new subdevice ids for hda-intel
This patch adds a couple of device ids for Acer laptops. In both cases,
the owners got the driver working by adding "model=acer" to their
modprobe.conf files.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
- hda-codec - restore HDA sigmatel pin configs on resume
This patch restores the Intel HDA Sigmatel codec pin configuration on
resume. Most of it is dedicated to saving the BIOS pin configuration
if necessary, so that even unrecognized chips can be resumed correctly.
Signed-off-by: Richard Fish <bigfish@asmallpond.org>
- [snd-intel-hda] enable center/LFE speaker on some laptops
This patch adds LFE mixer controls for laptops with a stac9200 and a mono
speaker pin with amplifier.
Signed-off-by: Richard Fish <bigfish@asmallpond.org>
- hda-codec - Add support for LG LW25 laptop
Added the support for LG LW25 laptop with ALC880 codec.
It's the same codec model as LG LW20 (model=lg-lw).
- hda-codec - Support multiple headphone pins
Some machines have multiple headpohne pins (usually on the lpatop
and on the docking station) while the current hda-codec driver
assumes a single headphone pin. Now it supports multiple hp pins
(at least for detection).
The sigmatel 92xx code supports this new multiple hp pins.
It detects all hp pins for auto-muting, too.
Also, the driver checks speaker pins in addition. In some cases,
all line-out, speaker and hp-pins coexist.
+ HDA Intel driver
- hda-intel - Fix suspend/resume with MSI
Fixed suspend/resume with MSI enablement.
- hda-intel - Switch to polling mode for CORB/RIRB communication
Automatically switch to polling mode for CORB/RIRB communication
if the irq-driven mode seems not working well. If the polling
mode still doesn't work, switch to single_cmd mode as fallback.
- intel_hda: MSI support
Simple patch to enable Message Signalled Interrupts for the HDA Intel
audio controller. Tested with:
Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
MSI is better because it means audio doesn't end up sharing IRQ with USB.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
- hda-intel - Remove volatile
Removed volatile from the position buffer pointer.
Also, use synchronize_irq() instead of unreliable msleep(1)
in the driver remove callback.
- sound/pci/hda/intel_hda: small cleanups
Cleanup whitespace.
Signed-off-by: Pavel Machek <pavel@suse.cz>
- hda-intel - Fix pci_disable_msi() call
Fix the order to call pci_disable_msi() to be after free_irq().
(Otherwise pci_disable_msi() bugs you.)
Also, added a description of disable_msi option to documentation.
- hda-codec - Fix SPDIF device number of ALC codecs
Assign the SPDIF always to the secondary device (dev#1) to keep
the same configuration. Move the optional capture device to the
third device (dev#2).
hda_intel now just ignores the NULL entries in the pcm arrays
from codecs.
- hda-intel - A slight cleanup of timeout check in azx_get_response()
A slight cleanup of timeout check in azx_get_response() to check
jiffies for HZ-independent timeout.
- hda-intel - New pci id for Nvidia MCP61
Added the new PCI id to support Nvidia MCP61 in snd-hda-intel driver.
Signed-off-by: Dan Cyr <rabidfly@hotmail.com>
+ HDA generic driver
- hda-codec - Fix mic capture with generic parser
Fixed the mic capture with generic parser of hda-codec driver
- Use VREF80 for mic pins if available
- Handle multiple inputs correctly on audio-input widget node.
Confirmed on a conexant codec chip.
- hda-codec - Add independent headphone volume control
This patch addes the support of the independent "Headphone" volume
control to the generic codec parser. Some codecs (e.g. Conexant)
have separate connections to the headphone and the independent amp
adjustment is needed.
- hda-codec - Support multiple headphone pins
Some machines have multiple headpohne pins (usually on the lpatop
and on the docking station) while the current hda-codec driver
assumes a single headphone pin. Now it supports multiple hp pins
(at least for detection).
The sigmatel 92xx code supports this new multiple hp pins.
It detects all hp pins for auto-muting, too.
Also, the driver checks speaker pins in addition. In some cases,
all line-out, speaker and hp-pins coexist.
+ ICE1712 driver
- Add dB scale information to ice1712 driver
Added the dB scale information for native digital volumes of ice1712 driver.
- Add dB scale information to ice1724 driver
Added the dB scale information to each board support code of ice1724 driver.
+ ICE1724 driver
- ak4xxx - Remove bogus IPGA controls
Remove IPGA volume controls and merge the IPGA range to ADC volume
controls. These two volumes are not really independent but connected
simply in different ranges 0-0x7f and 0x80-max. It doesn't make sense
to provide two controls.
Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range
to skip 0x80 (increment one) for such controls.
- Clean up and add TLV support to AK4xxx i2c driver
- Clean up the code in AK4xxx-ADDA i2c code.
- Fix capture gain controls for AK5365
- Changed the static table for DAC/ADC mixer labels to use
structs
- Implemented TLV entries for each AK codec
The volumes in AK4524, AK4528 and AK5365 are corrected with
a table to be suitable for dB conversion.
+ Intel8x0-modem driver
- intel8x0m - Free irq in suspend
Free the irq handler in suspend and reacquire in resume as well as
intel8x0 audio driver does. Some devices may change the irq line
dynamically during suspend/resume.
+ MIXART driver
- Add dB scale information to mixart driver
Added the dB scale information to mixart driver.
- mixart: Use SEEK_{SET,CUR,END} instead of hardcoded values
mixart: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
+ OPL3SA2 driver
- Add dB scale information to opl3sa2 driver
Added the dB scale information to opl3sa2 driver.
+ OPL4
- opl4: Use SEEK_{SET,CUR,END} instead of hardcoded values
opl4: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
+ PCI drivers
- Move CONFIG_SND_AC97_POWER_SAVE to pci/Kconfig
Moved the entry of CONFIG_SND_AC97_POWER_SAVE from drivers/Kconfig to
more appropriate place, pci/Kconfig.
+ PPC Keywest driver
- powermac - Fix Oops when conflicting with aoa driver
Fixed Oops when conflictin with aoa driver due to lack of
i2c initialization.
+ PPC Tumbler driver
- [PPC,SOUND] Fix audio gpio state detection
When booting with line out or headphone plugged, you won't hear anything.
The problem is that after reset all channels are muted, but the actual
value of the gpio port doesn't exactly match the active_val settings as
expected by check_audio_gpio. For example, the line_mute port is set to
7, but check_audio_gpio would expect 0xd or 0xf, thus its return value
indicates that it is not active, even though it is. AFAICS only looking
at the low bit is enough to determine whether the port is active.
Signed-off-by: Andreas Schwab <schwab@suse.de>
+ RME HDSP driver
- hdsp - Fix auto-updating of firmware
Fixed the auto-updating of firmware if the breakout box was switched
off/on. The firmware binary itself was already cached but it wasn't
loaded properly. Also, request_firmware() is issued if the box was
with firmware at module loading time but later it's erased.
The auto-update is triggered at each PCM action (open, prepare, etc)
and at opening proc files.
+ SPARC DBRI driver
- sparc dbri: removal of dri_desc struct
The structure is in big part redudant.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: more driver cleanup
A general clean up and redudant code removal.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: fixed setting of burst size after reset
A proper way to set DBRI's burst size. The size must be set after
each chip reset.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: simplifed linking time slot function
A simplified routines to link and unlink time slots.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: ring buffered version
It is a complete rework of low level layer to work on ring
buffers for comands and data descriptors. This removes annoying
noise due to delay in data buffer switching.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: recording is back
This patch fixes sound recording after the driver convertion to
ring buffered version. It also contains small clean ups to the
driver.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- dbri sparc: fixes TS leak
This patch fixes time slot leak in the dbri driver.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: OSS layer fix
This patch removes setting of incorrect stop_threshold value
inside the driver. After the change, playback through the OSS
layer works correctly.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: SMP fixes
The dbri driver hangs when used in kernel compiled with SMP
support due to inproper locking. The patch fixes it.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
- sparc dbri: hardware constrains added
This patch adds ALSA hardware constrains so stereo is possible
only with 16-bit format. It contains small cleanups to ring
buffered code as well.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
+ Trident driver
- Add dB scale information to trident driver
Added the dB scale information to trident driver.
+ USB generic driver
- usb-audio: increase number of packets per URB
To decrease the USB interrupts rate, increase both the default and the
maximum number of packets per URB.
- usb-audio: add mixer control names for the Aureon 5.1 MkII
Add a mixer name map for the TerraTec Aureon 5.1 MkII USB.
- Support for non-standard rates in USB audio driver
There's at least one USB audio chipset out there which supports only one
non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other
patches for this card which are unsatisfactory because they attempt to
map this rate to 44.1k leading to sound distortion.
The patch below uses SNDRV_PCM_RATE_KNOT to properly support the
non-standard rates where they are available.
Signed-off-by: Luke Ross <luke@lukeross.name>
+ Utils
- Fix check of CONFIG_VIDEO_V4L1 on 2.6.18 kernel
Fix the configure check of CONFIG_VIDEO_V4L1 introduced since 2.6.18 kernel.
+ VIA82xx driver
- Added TLV support to VIA82xx driver
Added the TLV support to VIA82xx driver for addition of
dB range information.
+ YMFPCI driver
- ymfpci - Add TLV entries for native volume controls
Added the linear volume TLV entries for YMFPCI native volume controls.
- alsa-lib
+ Core
- configure.in - fix "checking for versioned symbols" error in ./configure
See: bug#2274
checking for versioned symbols... ./configure: line 19347: test: "1: integer
expression expected
./configure: line 19350: test: "1: integer expression expected
This is caused by my libtool VERSION string:
VERSION="1.5.22 Debian 1.5.22-2"
The test in configure.in can't currently deal with the quotes.
- add support for hosts that have custom symbol prefixes
From: Mike Frysinger <vapier@gentoo.org>
some architectures, like Blackfin, have a prefix added to all symbols (in our
case it's historical baggage)
while normally packages shouldnt care, when code starts mixing assembler with
C (like symbol versioning), you need to dip down into the inner details.
find attached a patch which queries gcc for the prefix (all gcc toolchains
have a builtin define of __USER_LABEL_PREFIX__) and then automatically has
asm() constructs utilize this
since most targets define __USER_LABEL_PREFIX__ to nothing, hopefully this
shouldnt cause any problems :)
- make sure commands in cvs/hg compile scripts worked
simple patch ... just add 'set -e' to the top of the files in alsa-lib :)
From: Mike Frysinger <vapier@gentoo.org>
- Add --disable-alisp configure option
Added --disable-alisp configure option to disable alsip support.
+ Control API
- Fix bogus value when no user TLV is defined
Check whether non-zero size TLV is really returned by comparing
with the pre-filled pattern. ALSA 1.0.12 driver doesn't notify
the error even if user TLV is empty, so the previous value is
passed bogusly.
- Add dB range information to PCM softvol plugin
Added the dB range information to PCM softvol plugin.
Also, fixed the coefficient table to match with the
accurate dB step 0.20dB.
- Add handling of linear volume in simple mixer
Added the handling of linear volume TLV in the simple mixer layer.
- Check control API protocol version for TLV control
Check control API protocol version to avoid unnecessary ioctl
access for TLV stuff on the older drivers.
- configuration: avoid endless loop when a key refers to itself
remove one warning from tlv_read routine in control.c
- Add support of dB range compound TLV
Added the support of dB range compound TLV type in the simple mixer layer.
All get_dB, get_dB_range and set_dB ops are supported.
+ Device Name API
- remove unneeded headers from src/names.c
the src/names.c file includes many more headers than it actually needs ...
this causes troubles when porting to a target that lacks those headers :)
patch attached to scrub said headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Mixer API
- Add dB_range ops for simple mixer
Added the dB_range ops for simple mixer.
- Add set_dB ops to simple mixer
Added the set_dB ops to simple mixer.
- Add handling of linear volume in simple mixer
Added the handling of linear volume TLV in the simple mixer layer.
- Fix wrong scales in linear volume calculation
Fixed wrong scales of dB values (TLV is 0.01dB unit) in the linear
volume calculation.
- Fix segfault when invalid TLV is passed
Fix segfault when invalid TLV is passed.
The invalid TLV entries must be ignored as error.
- Add support of dB range compound TLV
Added the support of dB range compound TLV type in the simple mixer layer.
All get_dB, get_dB_range and set_dB ops are supported.
+ PCM API
- Add dB range information to PCM softvol plugin
Added the dB range information to PCM softvol plugin.
Also, fixed the coefficient table to match with the
accurate dB step 0.20dB.
- fix parsing of non-decimal integers in configuration files
safe_strtoll() now accepts numbers in any base. It formerly assumed that
its input was a decimal number, which had the consequence that
hexadecimal or octal numbers would be parsed as strings when occurring
outside of parameter lists.
This obsoletes some workarounds in the file permission parsing code that
relied on this bug.
- rate plugin: fix boundary calculations
Make sure that the rate plugin does not try to change the slave's
boundary value when setting software parameters; such a change wouldn't
affect the slave pcm.
Furthermore, the stop_threshold conversion code used the wrong boundary
value, and the silence_size conversion code did not take into account
the boundary value at all.
+ Timer API
- timer_hw: fix file descriptor leak
See: bug#2465
+ /Makefile.am
- Add --disable-alisp configure option
Added --disable-alisp configure option to disable alsip support.
+ /src/Makefile.am
- Fix a typo
Fixed a typo, wrongly placed endif.
- Add --disable-alisp configure option
Added --disable-alisp configure option to disable alsip support.
+ ALSA Lisp
- remove unneeded headers from alsa-lib/src/alisp/alisp.c
the alisp.c file includes wordexp.h even though it doesnt actually use any
wordexp functions ... causes trouble when target doesnt have wordexp
support :)
patch attached to scrub said headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Configuration
- fix parsing of non-decimal integers in configuration files
safe_strtoll() now accepts numbers in any base. It formerly assumed that
its input was a decimal number, which had the consequence that
hexadecimal or octal numbers would be parsed as strings when occurring
outside of parameter lists.
This obsoletes some workarounds in the file permission parsing code that
relied on this bug.
- configuration: avoid endless loop when a key refers to itself
remove one warning from tlv_read routine in control.c
- configuration: added one more alias check to detect a circular configuration
- Add --disable-alisp configure option
Added --disable-alisp configure option to disable alsip support.
- alsa-plugins
+ Core
- release 1.0.12
+ PulseAudio -> ALSA plugin
- Remove stray Polypaudio strings
Some stray mentions of the old Polypaudio name was still present in the
PulseAudio plug-in.
Signed-off-by: Pierre Ossman <ossman@cendio.se>
- alsa-utils
+ ALSA Control (alsactl)
- Restore user-defined TLV
Restore user-defined TLV (mainly for PCM softvol plugin).
TLV is stored in comment.tlv as a hex string.
+ alsaconf
- Fix setup for SLES10/SLED10
Fix the setup for SLES10/SLED10. They have no minor version.
- Initialize volumes using dB in alsaconf
Initialize volumes by specifying dB values in alsaconf.
This will give more sane values if the mixer elements support dB.
If not supported, simply the old value in percent is used.
+ alsamixer
- Show the mute dB state correctly
Show the mute dB state correctly as 'mute' in the status line.
+ amixer
- Add handling of dB to amixer
Added the dB value handling to amixer sset command.
Also, simplify the parser code.
Updated man page for dB suffix and some examples.
- Add linear-volume handling in amixer
Added the handling of linear-volume in amixer TLV decoder.
- alsa-tools
+ Envy24 Control
- Fix ADC controls with higher resolution in envy24control
Fixed envy24control to handle ADC volumes with higher resolution
properly.
Also, the bogus sync of gtk_adjustment between ADC and IPGA volumes
is fixed in the case no IPGA is detected.
- alsa-firmware
+ Digigram Echo Audio Firmware
- Remove non-existing loader_dsp.fw
Remove non-existing loader_dsp.fw from $(firmware_files).
This caused re-generation of fw files at every time.
- echoaudio, fix typo
This patch fixes a stupid typo that prevents a very important peice of
firmware from being installed.
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
+ EMU Firmware
- Added missing audio_dock.fw
Added missing audio_dock.fw to $(firmware_files).